E-mail
X-Press 14
X-Press pressing system for X-LAM (BSP, KLH, CLT, crossplan) wall elements.
The flat press is designed for planar pressing of plates for wall elements.
The CLT elements can be built up of loose strips in single longitudinal and cross layers as well as from previously glued single layers. Recommend is also a combination, where the across layers are prefabricated at a separate press and are then stacked with fresh side glued longitudinal strips to a pressing stack.
Model:
X-Press 14
Technical data
Length of wall elements
5.000 - 14.050 mm
Width of wall elements
2.450 - 3.550 mm
Thickness of wall elements
100 - 400 mm
Surface pressure
(at widths up to 2.800 mm) up to 1,0 N/mm²
Surface pressure
(at widths up to 3.500 mm) up to 0,8 N/mm²
Side pressure
(at 2.000 mm length) up to 120 kN
Frontside pressure
(over the width) up to 240 kN
Exit height
1.200 mm
Weight
app. 7 x 17.000 = 119.000 kg
Dimensions L × W × H
app. 15.500 x 6.400 x 2.950 mm
Installed power
50 kW
Air consumption
13 bar - 3.700 nl/min
Air consumption per cycle
app. 14.600 nl
Advantages of X-Press:
  • Fully automated sequence control with moveable carriage
    more>>>
  • High performance with use of fast-curing adhesives
    more>>>
  • Continuous production with a second carriage
    more>>>
  • Production of single consignated pieces is possible
    more>>>
  • Surface pressure up to 1 N/mm² = 10 kg/cm²
  • Surface pressure up to 560 t on a 3.500 × 2.000 mm workpiece
    more>>>
  • Integrated side pressure up to 120 kN = 0,3 N/mm2 at 200 mm thickness.
    more>>>
  • Frontside pressure up to 240 kN = 0,5 N/mm2 at 200 mm thickness and 2.400 mm width.
    more>>>
  • Minimizing of the gaps between laminations by pressing all narrow sides during planar gluing.
    more>>>
  • Modular construction in 2 m steps; the press can be extended without limitations
    more>>>
  • Transport and assembly of the 17 t modules is simple and fast.
    more>>>
  • No hydraulic equipment – no oil leakage
  • Low power consumption - no heating, no high-frequency
    more>>>
  • CPU prepared for integration in a plant process control.
    more>>>
Copyright © 2005 Ledinek Engineering. All rights reserved.
PRODUCTS: