- Questionnaire for planning machines - PDF format.
- Questionnaire for planning machines - DOC format.
   
   
Company:
Attention:
Street:
Country/City:
Tel.:
Fax:
Email:
WWW:
 
 
Questionnaire for planing machines
 
Please complete this questionnaire. Using these data, we will make you an offer.
Thank you very much for your time and effort!
 
I have interest for a machine:
 
1-3 side calibrating top bottom right-hand left-hand
2-4 side calibrating top bottom right-hand left-hand
with additional equip. Sanding Sawing other
 
I want to use the machine for following product/s :
Our capacity is m m2 m3 per Shift Day Year
Wood humidity is: %
We are working: shift/day
Working speed - max.:
25m/min 36m/min 60m/min 150m/min 200m/min 300m/min
other m/min
 
The workpiece is processed before calibrating as follow:
Pre planed 2 side 4 side Sawing 4 side 2 side
 
The machine's voltage is: V / Hz
 
Loading in to machine: Mechanization by hand
 
 
Technical data about elements
 
Working elements   1 I would like to make profiles like:  
Width
[mm]
Height
[mm] Chamfer = mm / 450
Length
[mm] Radius = mm
Tortuosity

[mm] DIN 4072
Tortuosity

[mm] DIN 68122 und DIN 68126
Tortuosity
[mm]
Spiral Tortuosity

[mm]
Feed speed [m/min]
Chip removal - bottom min. [mm]
Chip removal - bottom max. [mm]
Chip removal - upper min. [mm] Chamfer = mm / 450
Chip removal - upper max. [mm]
Chip removal - left min. [mm]
Chip removal - left max. [mm] Radius = mm
Chip removal - right min. [mm]
Chip removal - right max. [mm]
Kind of wood: spruce, fir tree  
Kind of wood: pine, larch  
Kind of wood: beech, oak  
Share in production [%]
After processing with planer production continue as follows:
 
At the moment this job is done with:
 
Planned date of investment:
 
 
 
 
Copyright © 2005 Ledinek Engineering. All rights reserved.
CONTACT